Tert-butyl methacrylate

product

Tert-butyl methacrylate

Basic Information:


Product Detail

Product Tags

Physical properties

Product name Tert-butyl methacrylate
Synonyms tertiary-Butyl Methacrylate,Butylmethacrylatetechnicalca

Butyl Methacrylate Tert-Butyl methacrylate,tert-Butyl Methacrylate Monomer 

CAS NO 585-07-9
Molecular formula C8H14O2
Molecular weigh 142.2
EINECS Number 209-548-7
MDL No. MFCD00048245
Structural formula  a

 

Physical and chemical properties

Melting point: -60℃

Boiling point: 132℃(let.)

Density: 0.875 g/mL at 25℃ (lit.)

Steam pressure: 7.13 hPa at 25℃

Refraction index: n20 / D 1.415 (let.)

Flash point: 81 F

Storage conditions: 2-8℃

Solubility: Insoluble in water

Morphology: the clear liquid

Color: Colorless

Water solubility: 464 mg/L at 20℃

LogP:2.54 at 25℃

RTECS number: OZ3675500

Safety information

Dangerous Goods Mark: Xi

Danger category code: 10-38

Safety note: 16

Dangerous Goods Transport Number: 3272

WGK Germany: 1

Danger level: 3

Package Category: III

Manufacture method

This product is esterified by methacrylic acid and tert-butanol, and the final product tert-butyl methacrylate is produced by salting out, dehydration and distillation.

Operational disposal and storage

Notes for safe operation
Avoid contact with the skin and the eyes. Avoid inhaling vapor and smoke.
Do not approach the source of the fire.-smoking or open flames prohibited. Take measures to prevent static build-up.
Conditions for safe storage, including any incompatibilities
Store them in a cool place. Keep the container closed and store it in a dry and ventilated place.
Open containers must be carefully resealed and kept in vertical position to prevent leakage.
Recommended storage temperature: 2-8℃

Health Hazard

Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution.

Application

Tert-Butyl methacrylate (tert-BMA) can be used in the formation of homo and block copolymers by atom transfer radical polymerization (ATRP) for potential usage in coatings, biomaterials and flocculants.Used as coatings, fabric handling agents, insulating materials, etc.


  • Previous:
  • Next:

  • Write your message here and send it to us